Apollo 14
- 13′ 10″ × 32′size
- 3′ 6″–6′ 1″deep
- 7.7kgallons
Tanning ledgeSwim-up seatingAuto-cover ready
Latham fiberglass pools
A Latham fiberglass pool is built in a factory and set in your yard by our crew – no months of forming and curing. The surface is smooth to the touch, resists algae and never needs a liner change or new plaster.

Why fiberglass
The shell arrives finished. The work in your yard is the dig, setting the shell, plumbing, backfill and the deck.
The smooth gelcoat is non-porous, so algae have a hard time holding on. Less brushing, fewer chemicals, no liner or plaster to replace.
Latham shells carry a manufacturer’s structural warranty; we back our installation work separately. Ask us for both in writing.

Installation
The shell comes on a truck and goes in by crane. We check the route, overhead lines and where the crane can stand.
We dig to the shape and set a level gravel base – the most important part of a fiberglass install.
The shell is lowered in, leveled, plumbed and backfilled while it fills with water, so pressure stays even.
Coping and deck go around the edge, equipment is connected and we start the pool.
Latham shape finder
Set the space you have and the features you want, tick up to 3 pools to compare, and tap ♡ to save a shape to your pool wishlist.
Tanning ledgeSwim-up seatingAuto-cover ready
Tanning ledgeSwim-up seatingAuto-cover ready
Tanning ledgeSwim-up seatingAuto-cover ready
Swim-up seatingAuto-cover readyWading area
Tanning ledgeSwim-up seatingAuto-cover ready
Tanning ledgeSwim-up seatingBuilt-in spaAuto-cover readyChampagne wall
Tanning ledgeSwim-up seatingBuilt-in spaAuto-cover readyChampagne wall
Tanning ledgeSwim-up seatingBuilt-in spaAuto-cover readyChampagne wall
Swim-up seatingAuto-cover ready
Swim-up seatingAuto-cover ready
Swim-up seatingBuilt-in spa
Swim-up seatingBuilt-in spa
Swim-up seatingBuilt-in spa
Tanning ledgeSwim-up seatingAuto-cover ready
Tanning ledgeBuilt-in spaAuto-cover readyChampagne wall
Swim-up seatingAuto-cover ready
Tanning ledgeSwim-up seatingAuto-cover ready
Tanning ledgeSwim-up seatingAuto-cover ready
Swim-up seatingWading area
Swim-up seatingWading area
Swim-up seatingAuto-cover ready
Swim-up seatingAuto-cover ready
Swim-up seatingAuto-cover readyWading area
Swim-up seatingAuto-cover readyWading area
Swim-up seatingAuto-cover ready
Swim-up seatingAuto-cover ready
Tanning ledgeSwim-up seatingAuto-cover ready
Swim-up seatingAuto-cover ready
Swim-up seatingAuto-cover ready
Swim-up seatingAuto-cover ready
Tanning ledgeAuto-cover ready
Tanning ledgeAuto-cover ready
Tanning ledgeAuto-cover ready
Tanning ledgeAuto-cover ready
Tanning ledgeAuto-cover ready
No shape matches all filters – try a larger size or remove a feature. Custom gunite is always an option.
Prices shown are for the Latham shell. Installed prices depend on access, excavation, deck and equipment – we quote them after a free site visit. The same shapes can be browsed at our sister stores, Elite Pool & Spa.
Questions
Most of the work in your yard is excavation, setting the shell, plumbing, backfill and the deck. Once permits are in place, many fiberglass pools are ready to swim in within a few weeks – much faster than gunite.
It depends on the yard and the budget. Fiberglass is the easiest to maintain and fastest to install; vinyl is the most affordable to build; gunite allows any shape. We build all three and help you compare.
Usually yes – cranes can lift over a house. We check access, overhead lines and where the crane can stand before we quote.
The shell is one part; excavation, access, deck, equipment and features make up the rest. Send us the shapes you like and we will price them installed after a free site visit.
Free estimates across the Birmingham metro. Tell us what you have in mind and we will come out, measure and give you a straight price.